Description/Usage
4hp
This Envelope Follower PCB was developed for use in the cellF synth, it is based on the design in the Buchla Easel. Obviously it has a few changes; a gain pot rather than a hi/lo switch and a gate output. It is a wonderfully sensitive and expressive EF, that works nicely with regular microphones and guitars.
The 1/4" jack connects to the switch of the 3.5mm input jack, the outputs are pre-amp (20x gain), envelope and gate. The LED indicates when the gate is on.
DIY
Build guide / BOM (pdf)
Panel Template
Description/Usage
4hp
This Envelope Follower PCB was developed for use in the cellF synth, it is based on the design in the Buchla Easel. Obviously it has a few changes; a gain pot rather than a hi/lo switch and a gate output. It is a wonderfully sensitive and expressive EF, that works nicely with regular microphones and guitars.
The 1/4" jack connects to the switch of the 3.5mm input jack, the outputs are pre-amp (20x gain), envelope and gate. The LED indicates when the gate is on.
DIY
Build guide / BOM (pdf)
Panel Template
Image 1 of 5
Image 2 of 5
Image 3 of 5
Image 4 of 5
Image 5 of 5