Divine CMOS returns
This is a slimmed down and modified version of the 4U Divine CMOS.
It can be used as a CV pattern generator with slew, frequency divider, gate pattern generator, envelope follower and a ring modulator that provides sub-harmonics that can be mixed together to create new sounds.
PCB - USD18
Panel - USD20
It can be used as a CV pattern generator with slew, frequency divider, gate pattern generator, envelope follower and a ring modulator that provides sub-harmonics that can be mixed together to create new sounds.
PCB - USD18
Panel - USD20
Small PSU PCB
...what a lame name, I was gonna call it 'hard candy' but can't be bothered. It was designed to power stand-alone Null-A panels.
Anyway, its about a simple PSU as you can get. Runs on 7812 and 7912 to give +/-12V. If you bolt them to a nice big heatsink, you could even get 1A per rail (using 1.5A spec'd regulators).
This PSU is powered by a 12VAC wallwart, so no need to wire any mains voltages.
The design is a slimmed down version of a PSU we use in the WAMod workshops, the only differences are:
USD8 each
Anyway, its about a simple PSU as you can get. Runs on 7812 and 7912 to give +/-12V. If you bolt them to a nice big heatsink, you could even get 1A per rail (using 1.5A spec'd regulators).
This PSU is powered by a 12VAC wallwart, so no need to wire any mains voltages.
The design is a slimmed down version of a PSU we use in the WAMod workshops, the only differences are:
- only 1 eurorack connector instead of 7
- no 5V section
- holes for installing spade connectors
USD8 each
Plague of Demons - thru0 VCO
PCB set - USD26
panel - USD24
assembled = USD280
available now
Build guide and panel template
This VCO uses DG202 (or equivalents) analogue switches to achieve the thru 0 function, based on ideas presented in Electronotes EN#75.
Very nice demo of sounds by Steve:
note 20 Jan 2018 - just got asked about this, so to be clear: the thru-0 mark in the centre of the panel is simply to indicate what type of VCO this is. I have no connection with Antumbra modules which use the same mark on all their panels (and were released a few months after this one).
panel - USD24
assembled = USD280
available now
Build guide and panel template
This VCO uses DG202 (or equivalents) analogue switches to achieve the thru 0 function, based on ideas presented in Electronotes EN#75.
Very nice demo of sounds by Steve:
CellF in HKW Berlin May 12 & 13
Cellf will be performing at HKW Berlin this Friday and Saturday.
The Saturday show is free and starts at 6pm
Technosphärenklänge #3: Concerts
CellF homepage
The Saturday show is free and starts at 6pm
Technosphärenklänge #3: Concerts
CellF homepage
Coming soon - small PSU
Although I never actually listed it for sale, there is a NLC PSU board with seven 16 pin connector points. It runs off a 12VAC wallwart and uses LM7812 & LM7912.
Anyway, mainly for stand-alone Null-A builders, this is a slimmed down version.
note the comma.
Anyway, mainly for stand-alone Null-A builders, this is a slimmed down version.
note the comma.
Coming soon - Divine CMOS
New version of Divine CMOS - clock divider, ring modulator/sub harmonic generator, CV and gate pattern generator/sequencer
