User Tools

Site Tools


modules:kareishuu_vco

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

modules:kareishuu_vco [2018/05/31 00:24]
donald_dasher created
modules:kareishuu_vco [2018/05/31 00:25] (current)
donald_dasher
Line 1: Line 1:
  ​Kareishuu VCO  ​Kareishuu VCO
 +
 PCB set = USD23 PCB set = USD23
 +
 10HP Panel = USD22 10HP Panel = USD22
 +
 assembled ​ = USD210 assembled ​ = USD210
  
 This VCO was mainly designed as an upgrade for the dual OTA VCO. It is a traditional triangle core VCO with a built in VCA for the FM control section. The design draws on sections of the Electronotes EN1, EN2 and EN3 VCOs along with some NLC injected in there for good measure. This VCO was mainly designed as an upgrade for the dual OTA VCO. It is a traditional triangle core VCO with a built in VCA for the FM control section. The design draws on sections of the Electronotes EN1, EN2 and EN3 VCOs along with some NLC injected in there for good measure.
 +
 It has much better tracking, a sine output and attenuators for all inputs. The self modulation control via the FM VCA enables voltage controlled waveshaping,​ the sine and tri waves can morph between their original shape to a pulse. It has much better tracking, a sine output and attenuators for all inputs. The self modulation control via the FM VCA enables voltage controlled waveshaping,​ the sine and tri waves can morph between their original shape to a pulse.
  
modules/kareishuu_vco.txt ยท Last modified: 2018/05/31 00:25 by donald_dasher