User Tools

Site Tools


modules:divide_conquer

Divide & Conquer

DIY

Description/Usage

Divide & Conquer

Divide & Conquer is a a clock divider module containing 4 different dividers:

  /2, /4, /8, /16, /32, /64, /128, /256
  /1.5, /3
  /2.5, /5
  /3.5, /7

All sections will run off a signal patched into section 1. The module can be patch-programmed to obtain other divisions. For example; patch output /2 into section 4 to get divide by 14 from the /7 output. The circuit is CMOS based and contains no microprocessors.

This module is intended to be a companion module for the Bindubba Sequencer.

Pics

Specs

HP: 8

Inputs

IN: (Top right in) This is the main input. All other in's are normalled to this one
IN: (Top left in)*
IN: (Middle left in)*
IN: (Bottom in)*

* Patching into this input breaks normalization from 'main' in.

Outputs

/2:
/4:
/8:
/16:
/32:
/64:
/128:
/256:

/3/2: 1.5
/3:

/5/2: 2.5
/5:

/7/2: 3.5
/7:

Examples

modules/divide_conquer.txt · Last modified: 2017/10/26 02:38 by steve